B-2 Jumper Settings
Password Clear/CPU Speed Jumper
Use the following steps to change the clear the password and/or change the CPU speed.
1.
With the system powered off and unplugged, jumper J1A1 for Configure Mode
(see Figure B-1).
Figure B-1 CPU Speed/Password Clear Jumper
2.
Restart the system. The Setup utility launches automatically. Setup displays the
Maintenance Menu, which is available only in Configure Mode.
3.
Perform the system setting change according to the menu choices and system
prompts to:
perform a Password Clear
change the CPU speed.
4.
Power off and unplug the system. Jumper J1A1 for normal operation (see
Figure B-1).
5.
Restart the system. If the password was cleared, run Setup to establish a new
password (see “The Security Menu” in Section 2 for complete instructions).
