Repair 5-13
3 1/2-Inch Hard Disk Drive Removal
Use the following steps to remove the 3 1/2-inch hard disk drive:
1.
Remove the system unit cover as previously described.
2.
Unplug the power and signal cables from the hard disk drive.
NOTE:
When reinstalling the drive, note that all
power cables are keyed to fit only in the correct
position.
3.
Remove the four screws holding the 3 1/2-inch hard disk drive to the wall of the
chassis (see Figure 5-11).
4.
Slide the 3 1/2-inch hard disk drive out of its bracket and remove it from the
system.
Figure 5-11 Hard Disk Drive Screws
