Setup and Operation 2-39
4.
Click
Auto
to do a basic operating system restore.
After you click
Auto
in Windows 95, the Partition Information screen appears as
shown in the following figure. (In Windows NT 4.0, the FAT16 Partition warning
screen appears as described later in this procedure.)
Figure 2-14 Partition Information Screen
5.
The Partition Information screen that appears in Windows 95 has three options
(Back, FAT 16, and FAT 32) and lets you select the File Allocation Table (FAT)
type you want to use for the operating system restore:
Click
Back
to return to the Operating Mode screen.
Click
FAT 16
to select the FAT16 allocation table (currently recommended
for Windows 95 systems with older software).
Click
FAT 32
to select the FAT32 allocation table (available for Windows 95
systems only).
NOTE:
Some older software may not work in a
Windows 95 system configured for FAT 32.
NOTE:
Select FAT 16 if a dual boot system
with Windows 95 and Windows NT is being
restored.
NOTE:
In Windows NT 4.0 systems, the
Partition Information screen does not appear.
Instead, the FAT16 Partition warning appears.
This screen is described in the following
paragraph.
