Repair 5-15
Power Supply Removal
Use the following steps to remove the power supply:
WARNING:
Before removing the system unit
cover, turn off the power and unplug the system
power cable. Power is removed only when the
power cable is unplugged.
1.
Remove the system unit cover as previously described.
2.
Unplug the power cables attached to the riser board connector.
3.
Unplug the power cables from all installed devices.
4.
Cut any tie wraps that may be securing the power cables to the system unit.
5.
Remove the four screws securing the power supply to the back of the system unit
(see Figure 5-13).
6.
Remove the power supply from the system unit.
Figure 5-13 Power Supply Screws
