2-2 System Configuration
This section provides information for configuring the system. The section
includes:
system interrupt request (IRQ) assignments
system jumper settings
procedures for using the BIOS Setup utility to configure the system
descriptions of video modes
information on power management
descriptions and procedures for using the following utilities and
applications
SCSISelect utility
BIOS Update utility
LANDesk Client manager
NEC Auto Backup utility
NEC Select Install CD
NEC Driver CD
Cheyenne Backup
NEC Security
NEC SNMP Agent
NEC WebTelligent
NEC Configuration Change Notice.
Interrupt Requests
The following paragraphs list the system interrupts (IRQs), parallel addresses
and interrupts, and serial addresses and interrupts. Section 4, “System Board,”
includes information on system resources (memory map, I/O addresses, and
DMA settings).
System Interrupts
The system has 16 IRQs (IRQ 0 through 15) assigned to different devices (for
example, printer, modem, keyboard, mouse). Initial IRQ settings are assigned at
the factory, with settings dependent on the installed device(s). Several IRQs are
unassigned for the installation of add-on devices. See “BIOS Setup Utility” in
this section for information on using the utility to assign or change the
interrupts.
Summary of Contents for POWERMATE 8100 Series
Page 17: ...1 System Overview Configurations Features Components ...
Page 131: ...4 System Board Connectors Jumpers and Sockets Components Pin Assignments Resources ...
Page 189: ...7 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning ...