NEC POWERMATE 8100 Series, Service And Reference Manual

Page: 49 / 273

System Configuration 2-17
Floppy Options
This menu configures the floppy (diskette) drive device whenever it is removed
or its settings need to be changed. Use the fields in the following table to
configure the system when making any diskette drive changes.
Floppy Drive Options
Menu Item Settings and Descriptions
Floppy Disk Controller Settings: Enabled (default), Disabled.
This field enables the diskette drive interface connector on
the riser board.
Diskette A: Settings: Disabled, 360 KB 5 1/4”, 1.2 MB 5 1/4”, 720 KB 3
1/2”, 1.44/1.25 MB 3 1/2" (default), 2.88 MB 3 1/2”.
Floppy Write Protect Settings: Disabled (default), Enabled.
Set the field to Enabled to write-protect diskettes.
DMI Event Logging
This menu keeps track of system events. Use the fields in the following table to
configure DMI events.
DMI Event Logging
Menu Item Settings and Descriptions
Event Log Capacity This field is read-only and cannot be changed from the BIOS
Setup utility.
Example: Space Available
Event Log Validity This field is read-only and cannot be changed from the BIOS
Setup utility.
Example: Valid
View DMI Event Log [Enter]
Press Enter to view the DMI Event Log.
Clear all DMI Event Logs Settings: No (default), Yes.
Select Yes to clear all DMI event logs upon rebooting.
Reverts to No after the reboot.
Event Logging Settings: Disabled, Enabled (default).
Enabled allows logging of DMI events.
Prompt on POST Errors Settings: Enabled (default), Disabled.
When set to Enabled and errors are detected during POST,
the POST pauses and prompts for user input.
ECC Event Logging Settings: Disabled, Enabled (default).
This field is only displayed when ECC DIMMs are detected.