![background image](http://html.mh-extra.com/html/nec/powermate-8100-series/powermate-8100-series_service-and-reference-manual_248654121.webp)
3-24 Disassembly and Reassembly
Removing a 5 1/4-Inch Device
3 1/2-Inch Hard Drive Removal
The system has one internal drive bay located near the right rear of the chassis.
Upgrade the system by replacing an existing hard drive or by adding another.
Remove the 3 1/2-inch hard drive as follows.
1.
Turn off the system and disconnect the system power cord.
2.
Remove the system unit cover (see “Removing the Cover”).
3.
Label the device signal and power cables connected to the currently installed
hard drive and then disconnect them.
4.
Remove the four screws securing the currently installed hard drive to the
outer wall of the chassis.
5.
Remove the drive from the chassis.
Removing the Hard Drive Screws
\
Summary of Contents for POWERMATE 8100 Series
Page 17: ...1 System Overview Configurations Features Components ...
Page 131: ...4 System Board Connectors Jumpers and Sockets Components Pin Assignments Resources ...
Page 189: ...7 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning ...