![background image](http://html.mh-extra.com/html/nec/powermate-8100-series/powermate-8100-series_service-and-reference-manual_248654127.webp)
3-30 Disassembly and Reassembly
Removing the System Board Plastic Rail
A – System Board
C – Grounding Clips
B – Plastic Rail
D – Screws
5.
Lift the system board off the plastic rails.
6.
Lift the grounding clips off their notched seats on the plastic rail.
Note:
The grounding clips are keyed to fit correctly on
the plastic rail. Make sure the clips are fully seated on the
plastic rail before attaching the rails to a system board.
Riser Board Removal
Remove the riser board as follows.
1.
Turn off the system and disconnect the system power cord.
2.
Ensure that all external cables are disconnected from the rear of the system.
3.
Remove the system unit cover (see “Removing the Cover”).
4.
Label and unplug all cables on the riser board and on any expansion boards.
5.
Remove all expansion boards (see “Expansion Board Removal”).
6.
Remove the system board (see “Removing the System Board”).
Summary of Contents for POWERMATE 8100 Series
Page 17: ...1 System Overview Configurations Features Components ...
Page 131: ...4 System Board Connectors Jumpers and Sockets Components Pin Assignments Resources ...
Page 189: ...7 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning ...