3-6 Disassembly and Reassembly
Expansion Board Removal
Remove any installed expansion board(s) as follows.
1.
Remove the system unit cover as previously described.
2.
Label and disconnect any cables connected to the board.
Note:
If removing an expansion board from one of the
lower expansion slots, remove the AGP board from the
system (see “AGP Board Removal” later in this section).
3.
Remove and save the screw securing the board to the support bracket (see
the following figure).
Removing an Expansion Board
4.
Pull the board straight out of the connector. Do not rock a PCI expansion
board from side to side to release it from the connector.
Summary of Contents for POWERMATE 8100 Series
Page 17: ...1 System Overview Configurations Features Components ...
Page 131: ...4 System Board Connectors Jumpers and Sockets Components Pin Assignments Resources ...
Page 189: ...7 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning ...