![background image](http://html.mh-extra.com/html/nec/powermate-8100-series/powermate-8100-series_service-and-reference-manual_248654123.webp)
3-26 Disassembly and Reassembly
Removing the Power Supply Screws
A – Power Supply Screws
System Board Removal and Replacement
Use the following steps to remove and replace the system board.
Removing the System Board
Remove the system board as follows.
1.
Turn off the system and disconnect the system power cord.
2.
Ensure that all external cables are disconnected from the rear of the system.
3.
Remove the system unit cover (see “Removing the Cover”).
4.
Lift the insertion/extraction latch up slightly and pull it away from the
system unit (see the following figures). The board releases and slides part
way out of the system.
Unlatching the System Board
A – System Board
B – Insertion/Extraction Latch
Summary of Contents for POWERMATE 8100 Series
Page 17: ...1 System Overview Configurations Features Components ...
Page 131: ...4 System Board Connectors Jumpers and Sockets Components Pin Assignments Resources ...
Page 189: ...7 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning ...