![background image](http://html.mh-extra.com/html/nec/powermate-8100-series/powermate-8100-series_service-and-reference-manual_248654055.webp)
System Configuration 2-23
Boot Menu Options
Menu Item
Settings and Descriptions
Hard Drive
IDE drives. IDE drives are identified by auto-typing. Select an
IDE device from the option list with the up or down arrow, then
press the plus or minus key to change the device boot order.
Bootable ISA Cards. Select an ISA card from the option list
with the up or down arrow, then press the plus or minus key to
change the card’s boot order.
Removable Devices
Removable devices are identified by auto-typing. The first
device in the list is the bootable device.
Select a device from the option list with the up or down arrow,
then press the plus or minus key to change the device boot
selection.
Exit Menu
Selecting the Exit menu displays the exit options listed in the following table.
Exit Menu Options
Menu Item
Settings and Description
Exit Saving Changes
Saves the setting just made and exits BIOS.
Exit Discarding Changes
Discards the changes just made and reverts back to the
settings existing before starting the BIOS session.
Load Setup Defaults
Reverts to the factory-shipped settings.
Maintenance Menu
The Maintenance menu only appears when the system board has been jumpered
for Configure mode. (See Section 4, “System Board” for system board jumper
settings.) When the system is restarted in Configure mode, the Setup utility
launches automatically and comes up in the Maintenance menu. (The Main,
Advanced, Power Management, Security, Boot, and Exit menus are also
available.)
The Maintenance menu provides access to the options listed in the table on the
following page.
!
CAUTION
Starting the system in Configure mode resets BIOS settings
to their factory defaults. Before jumpering for Configure
mode, write down any customized BIOS settings. When the
system is started in Normal mode, press
F2
to bring up the
BIOS Setup utility. Re-customize the BIOS settings.
Summary of Contents for POWERMATE 8100 Series
Page 17: ...1 System Overview Configurations Features Components ...
Page 131: ...4 System Board Connectors Jumpers and Sockets Components Pin Assignments Resources ...
Page 189: ...7 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning ...