![background image](http://html.mh-extra.com/html/nec/powermate-8100-series/powermate-8100-series_service-and-reference-manual_248654106.webp)
Disassembly and Reassembly 3-9
Blank Panel and Metal Bay Cover Removal
If you are installing an accessible device, such as a Zip drive or tape drive, first
remove the blank panel and the metal bay cover.
Remove the blank panel as follows.
1.
Remove the blank panel by pressing the panel tabs from inside the front
panel and pushing the blank panel out (see the figure on the following page).
Locating the Blank Panel Tabs
A – Blank Panel Tabs
2.
Remove the perforated metal plate from the selected bay on the chassis by
pulling the plate back and forth until it releases (see the following figure).
Locating the Breakaway Panel
A – Breakaway Blank Panel
3.
Install the device.
Summary of Contents for POWERMATE 8100 Series
Page 17: ...1 System Overview Configurations Features Components ...
Page 131: ...4 System Board Connectors Jumpers and Sockets Components Pin Assignments Resources ...
Page 189: ...7 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning ...