manualshive.com logo in svg

NEC POWERMATE 2000, Service And Reference Manual

Share
Download
NEC POWERMATE 2000 Service And Reference Manual Download Page 67

2-40   System Configuration

!

 

NEC Auto-Discovery Agent

!

 

TCP/IP.

NEC WebTelligent Installation

Install the WebTelligent software and the NEC Auto Discovery Agent software
on a Windows 98, Windows 2000, or Windows NT web server as follows.

1. 

Close all open applications before installing WebTelligent and Auto
Discovery Agent.

2. 

Install the web server software on a machine with a host name such as
PowerMate-A. Set up the web server as follows.

!

 

Install your web server software — Microsoft Personal Web Server or
other software (see the preceding list).

!

 

On the taskbar, click 

Start

, point to 

Settings

, and click 

Control Panel

.

!

 

At the Control Panel, double click 

Personal Web Server

.

!

 

In Personal Web Server, click the 

Administration

 tab.

!

 

In Administration, click 

Administration

 to start the web browser.

Note

: 

If the web browser does not start, click the

Startup tab, click Start, click the Administration tab, and
click Administration to start the browser.

3. 

Install the WebTelligent software on the web server.

Note

: 

WebTelligent software is available on the NEC

Application and Driver CD. The software can also be
downloaded from the NECC website
(www.nec-computers.com).

!

 

For systems with WebTelligent on the NEC Application and Driver CD,
see “Installing ToolTelligent Utilities.”

!

 

If downloading the WebTelligent software from the NECC website
(

www.nec-computers.com

), save the download file in your C:\Temp

directory or other appropriate directory. Double click 

setup.exe

, and

follow the prompts.

4. 

Configure the installation.

!

 

Follow the WWW Administration link, click the 

Directories

 tab, and

edit the home page.

!

 

Modify the directory entry to 

C:\Program

Files\PBNEC\WebTelligent\html

 and click 

OK

.

Summary of Contents for POWERMATE 2000
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands