manualshive.com logo in svg

NEC POWERMATE 2000, Service And Reference Manual

Share
Download
NEC POWERMATE 2000 Service And Reference Manual Download Page 2

First Printing — March 2000

Copyright 2000

NEC Computers Inc.

15 Business Park Way

Sacramento, CA  95828

All Rights Reserved

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is the
valuable property of NEC Computers Inc. (hereinafter “NECC”) and/or its licensors. NECC and/or
its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this
document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to
the extent said rights are expressly granted to others.

The NECC product(s) discussed in this document are warranted in accordance with the terms of the
Warranty Statement accompanying each product. However, actual performance of each such
product is dependent upon factors such as system configuration, customer data, and operator
control. Since implementation by customers of each product may vary, the suitability of specific
product configurations and applications must be determined by the customer and is not warranted
by NECC.

To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without prior
written approval of NECC is prohibited.

NEC is a registered trademark of NEC Corporation.

PowerMate and MultiSync are registered trademarks and ToolTelligent, WebTelligent, and VistaScan are trademarks of

NEC Corporation or one of its subsidiaries. All are used under license by NEC Corporation and/or one or more of its
subsidiaries.

All other trademarks and registered trademarks are the property of their respective trademark owners.

Summary of Contents for POWERMATE 2000
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands