NEC PowerMate 2000 Series, Service And Reference Manual, Page: 69 / 175

2-44 System Configuration
4.
Check each policy required and highlight the policy name.
!
For Communities, Traps, and Permitted Managers, click Show and
configure the policy as appropriate.
!
Highlighting the Internet MIB policy opens the contact name and
location fields in the Policy window for editing.
!
Click File and click Save .
!
Click
File
and click
Exit
.
Configuring the NEC SNMP Agent for Windows NT
Configure the NEC SNMP Agent for Windows NT as follows.
1.
In the Windows taskbar, click Start , point to Settings , and click Control
Panel .
2. At the Control Panel, double click the
Network
icon.
3. At the Network screen, click the
Services
tab and click
Add
.
4.
At the Select Network Services screen, highlight SNMP Service , and click
OK
.
5. At the Microsoft SNMP Properties screen, set the following three properties:
!
Security — Limits the set of computers than can perform SNMP
management on this computer to those in the community and/or specific
computer names the user provides.
!
Traps — Limits the set of computers that receive traps from this
computer to those in the community and/or specific computer names the
user provides.
Note
:
For an SNMP management console, such as the
NEC SNMP Desktop Manager and HP OpenView, IP
addresses (for example, 157.123.176.100) must be entered
in the Traps for “Public Community” to receive traps from the
NEC SNMP agents.
For the NEC SNMP Agent to send a trap to the NEC SNMP
Desktop Manager, the port number can be configured from
the registry: "HKEY_LOCAL_MACHINE\SOFTWARE\
NEC Computer Systems Division\NEC SNMP Desktop
Agent\Port Number". The default port number is set to
55593.
!
Agent — Allows the user to specify a contact name and location for the
computer.