4-4 System Board
System Board Internal Connector and Socket Locations - Side 2
A – CardBus Connector P13
G – Serial Port Connector P04
B – DC Power Connector P07
H – Parallel Port Connector P03
C – USB Connector P06
I – Keyboard Port P02
D – Speaker Connector P12
J – Mouse Port P01
E – VGA Connector P05
K – LAN Connector P15
F – LCD Panel Connector P11
L – Socket370 (under heat sink)
System Board Jumpers
The system board contains one field usable jumper block (Clear Password
jumper 7F4) and two jumper blocks (2F19 and HE5) for factory use. Jumper
blocks 2F19 and HE5 should not be changed.
The preceding figure “System Board Internal Connector, Socket, and Jumper
Locations - Side 1” shows the location of jumper block 7F4 on the system
board. To set the jumper block, see the following paragraph.
Clearing the Password
If the password needs to be cleared and reset, set jumper block 7F4 as follows.
Jumpers are set correctly at the factory for the system
configuration. Only change (or check) the appropriate
jumper setting if you forgot your password or want to change
the password.
1.
Power off and unplug the system and any peripherals.
The system power must be off before opening the system
and changing a jumper setting.
Summary of Contents for PowerMate 2000 Series
