NEC PowerMate 2000 Series, Service And Reference Manual, Page: 41 / 175

2-16 System Configuration
Security Menu Items
Menu Item Settings (default is bold)
Supervisor
Password Is Clear, Set
Status only, user cannot modify. Supervisor password controls access
to the BIOS Setup Utility.
User Password Is Clear, Set
Status only, user cannot modify. User password controls access to the
system at boot.
Set Supervisor
Password Press Enter to access.
Use this field to set or change the supervisor password. Press Enter
to bring up a dialog box where the password can be entered and
confirmed.
Set User
Password Press Enter to access.
Use this field to set or change the user password. Press Enter to bring
up a dialog box where the password can be entered and confirmed.
Security Mode Press Enter to access the Security Mode.
Use this mode to select Password (default), SmartCard, or
FingerPrint. Press Enter to open the selected field.
Use the SmartCard field to assign access to the SmartCard Reader by
the supervisor and/or user. Press Enter to bring up the SmartCard
Reader dialog box for setting up SmartCard security.
The Assign Supervisor SmartCard field controls Supervisor access to
the BIOS Setup utility and the system. A PIN number controls access.
The Assign User SmartCard field controls user access to the system
at boot. A PIN number controls access.
Password on Boot
Disabled, Enabled
When Enabled, requires password entry before boot. System remains
in secure mode until password is entered.
Fixed Disk Boot
Sector Normal, Write Protect
Write Protect protects the boot sector on the hard disk from viruses.
Diskette Access Supervisor, User
Controls access to the diskette drive.
Network Boot
Setting Press Enter to access.
Keyboard
Mouse Lock
Disabled, Enabled
Select Enabled to lock the keyboard and mouse when remote booting.
BIOS Lock
Disabled, Enabled
Available only when Password on Boot is enabled and Supervisor
Password is set.