NEC PowerMate 2000 Series, Service And Reference Manual, Page: 142 / 175

PowerMate 2000 Series Release Notes A-3
Do not install both the NEC SNMP Agent and LANDesk
Client Manager on the same computer.
See “NEC Application and Driver CD” in Chapter 3 of the PowerMate 2000
Series User’s Guide for detailed information about installing applications from
the NEC Application and Driver CD.
Installing NEC SNMP Agent
See the previous section “Installing Applications in the Correct Order” and see
“NEC SNMP Agent” in Chapter 4 of the PowerMate 2000 Series User’s Guide
for detailed installation information.
Do not install both the NEC SNMP Agent and LANDesk
Client Manager on the same computer.
Uninstalling the NEC SNMP Agent or LANDesk Client Manager
LANDesk Client Manager and the NEC SNMP Agent are not fully compatible
when both are installed on the same computer. See the following sections for
information about uninstalling these applications.
When Both NEC SNMP Agent and LANDesk Client Manager Are Installed
If both applications have been installed, LANDesk Client Manager does not
function correctly, and cannot display ASIC-related tabs for temperature, fan,
voltage, and chassis intrusion status.
In addition, each time the computer is restarted, a Service Control Manager
window displays an error message and prompts the user to press
Enter .
If LANDesk Client Manager and the NEC SNMP Agent have both been
installed, it is not possible to remove either application using the uninstall
utility. If you attempt to remove one of the applications, you must perform a full
operating system restore using the NEC OS Restore CD.
After the full restore, reinstall all appropriate applications from the NEC
Application and Driver CD. Do not reinstall both LANDesk Client Manager and
the NEC SNMP Agent.