![background image](http://html.mh-extra.com/html/nec/powermate-2000-series/powermate-2000-series_service-and-reference-manual_248648030.webp)
System Configuration 2-5
Jumpers are set correctly at the factory for the system
configuration. Only change the appropriate jumper settings.
Otherwise, keep the jumpers at their factory settings.
Jumper block 7F4 is a two-pin jumper block for clearing the system password if
the password is forgotten. The factory setting for 7F4 is pins 1 and 2 jumpered.
To clear the password, the system must be powered down, the jumper removed
and reinstalled, and the system powered up.
Jumper block 2F19 is a three-pin jumper block for factory use. The factory
setting for 2F19 is pins 1 and 2 jumpered. This setting should not be changed.
Jumper block HE5 is a three-pin block for factory use. The factory setting for
HE5 is pins 1 and 2 jumpered. This setting should not be changed.
IBM Mobile Hard Drive Jumper Settings
For systems with the IBM 6.4-MB IDE mobile hard drive, the factory settings
for the jumper on the interface connector of the drive are shown in the following
table. The factory setting is for a single drive installed on the IDE primary
channel. The 4-pin jumper block is located at the right end of the interface
connector on the drive (when looking at the rear of the drive).
Specifications for the hard drive are included in Section 9.
IBM Mobile Hard Drive Jumper Settings
Function
Jumper Pins
Description
Master Device
No Jumper
Sets hard drive as master device in single drive system.
Factory setting: no jumper.
Slave Device
Jumper
position 1
Sets hard drive as slave (the two right most pins
jumpered).
Cable Select
(CSEL)
Jumper
position 3
Not used.
Summary of Contents for PowerMate 2000 Series
