NEC PowerMate 2000 Series, Service And Reference Manual, Page: 75 / 175

Disassembly and Reassembly 3-5
SO-DIMM Module Removal
Remove the SO-DIMM module(s) as follows.
1. Close all applications, shut down the operating system, turn off system
power, and unplug the AC power adapter and power cord from the power
source and the back of the system unit.
2.
Turn off and disconnect all peripherals.
To prevent damage to the LCD panel screen when
performing step 3, ensure that your work surface is clean,
flat, smooth, and free of any objects before positioning the
system face down.
3. Carefully position the system with the LCD panel face down on a clean, dry,
smooth surface and with the bottom of the system unit facing you.
4.
Remove the single screw holding the SO-DIMM panel in place on the
bottom of the system unit. Set the panel aside.
Removing the SO-DIMM Module Panel
A – Access Panel B – Screw