NEC PowerMate 2000 Series, Service And Reference Manual, Page: 146 / 175

PowerMate 2000 Series Release Notes A-7
5. Select
SAVE/EXIT
in the BootMagic Configuration box. Either choice, to
enable BootMagic or to not enable BootMagic, requires the SAVE/EXIT
selection.
To correctly complete the BootMagic configuration, you must
select SAVE/EXIT from the BootMagic Configuration box,
even if you do not want to use BootMagic. Omitting this step
results in an error message.
System Configuration
See the following sections for system configuration information.
Configuring the System for the NEC SNMP Agent
TCP/IP must be enabled before you can use the NEC SNMP Agent. See
“Changing Network Settings” in this document to enable TCP/IP. See
“Installing Applications in the Correct Order” in this document and “NEC
SNMP Agent” in Chapter 4 of the PowerMate 2000 Series User’s Guide for
installation information.
Configuring the System for NEC WebTelligent
TCP/IP must be enabled before you can use NEC WebTelligent. See “Changing
Network Settings” in this document to enable TCP/IP. See “NEC WebTelligent”
in Chapter 4 of the PowerMate 2000 Series User’s Guide for detailed
installation information.
Configuring the System for Microsoft Internet Explorer
TCP/IP must be enabled before you can use Microsoft Internet Explorer. See the
next section, “Changing Network Settings,” to enable TCP/IP. Install Internet
Explorer from the NEC Application and Driver CD.
Note:
Internet Explorer 5.0 comes preinstalled on
systems with the Windows 98 or Windows 2000 operating
system.
Changing Network Settings
All systems are configured with the NetBEUI and NWLink protocols enabled.
However, before you connect a system to your network you might need to:
!
enable a different network protocol
!
disable unneeded protocols for enhanced system performance
!
add or change network, domain, and gateway information.