manualshive.com logo in svg

NEC IntraMail 4, System Manual


Share
Download
background image

Conversation Record

62

◆

Chapter 2: Features

IntraMail  System Guide

- 03.20.07 or higher: Enter Voice Mail Record Key code 17 + the mailbox number.

- The mailbox number can be your own, a co-worker’s, or any valid Subscriber Mailbox.

- You can optionally use the RECORD soft key instead.

✔

By default, a keyset does not have a Voice Mail Record Key.

Step 3

Enable the Conversation Record Beep and Warning.

3.1

1808 - IntraMail Subscriber Mailbox Options:

 

Recording Conversation Beep

 on page 204.

- If enabled (

Y

), all parties on a call being recorded will hear the voice prompt 

Recording 

followed by a beep when the extension user initiates Conversation Record. If disabled (

N

), 

the voice prompt and beep will not occur.

-

Disabling this option may be interpreted as an invasion of privacy.

✔

By default, this option is enabled (

Y

).

Step 4

Set the maximum length of recorded conversations.

4.1

8004: IntraMail System Options:

 

Subscriber Message Length

 on page 213.

- The length of a recorded conversation is 10 times this interval.
- The range for this option is 

1-4095

 seconds.

- Since the Conversation Record time cannot exceed 4095 seconds, any settings in this 

option larger than 409 have no effect on the length of recorded conversations.

✔

By default, this option is 

120

 seconds. This means the default length of recorded conversa-

tions is 1200 seconds (20 minutes).

Summary of Contents for IntraMail 4

















































































































































































































































































Reviews:

No comments

Related manuals for IntraMail 4

Nitsuko NVM-Series Quick Reference Manual preview
NVM-Series
Brand: Nitsuko Pages: 3

Brands by name

Popular brands

Load more brands