manualshive.com logo in svg

NEC IntraMail 4, System Manual


Share
Download
background image

 

Installation

 

DS1000 Installation

 

IntraMail  System Guide

 

Chapter 1: Quick Setup

 

◆

 

3

 

1

 

Step 6

 

Install the IntraMail PCB 

 

(Figure 4: Installing the IntraMail PCB in DS1000)

 

.

 

- Attach a grounded wrist strap to a known earth ground.

 

■

 

Use the cabinet ground lug if the ground wire is still connected.

- Discharge any built-up static electricity by touching the cabinet ground lug.
- Plug in the IntraMail PCB as shown below.

 

■

 

Be sure to snap the PCB into the supplied plastic standoffs.

 

Step 7

 

Replace and re-secure the top panel.

 

Step 8

 

Complete the reinstallation.

 

- Hang the cabinet back on the wall.
- Reinstall all extension, trunk, and auxiliary cabling.
- Replace and lock the cover.
- Plug in the system and turn on the system power.

 

Step 9

 

Verify IntraMail operation.

 

- After the system restarts, go to any keyset and press 

 

MW

 

.

 

■

 

You should immediately log into that extension’s mailbox and hear the voice prompt, “

 

You have 

no new messages.

 

”

 

Figure 4: Installing the IntraMail PCB in DS1000

80044 - 2

Summary of Contents for IntraMail 4

















































































































































































































































































Reviews:

No comments

Related manuals for IntraMail 4

Norstar Voice Mail 4.0 Set Up And Operation Manual preview
Voice Mail 4.0
Brand: Norstar Pages: 258

Brands by name

Popular brands

Load more brands