NEC IntraMail 4 System Manual Download

Page: 194 / 272

Voice Mail Overflow

184

◆

Chapter 2: Features

IntraMail System Guide

1.2

1003 - Trunk Options:

Direct Termination (Night)

on page 195.

- To have the Ring Group answer the trunk only at night, enter the Ring Group master num-

ber (e.g.,

600

✔

By default, at night trunks are terminated to

Key Ring

(entered by pressing

CLEAR

Step 2

Assign the Ring Group DIL Over

ow destination.

2.1

1003 - Trunk Options: Activate Over

ow During the Day.

- To activate over

ow during the day and at night, enter

(9).

- Refer to the

DS1000/2000 Software Manual

for more.

- By default, this option is

(6).

2.1.1

1003 - Trunk Options: Day Over

ow Destination

- Enter the IntraMail master number (

700

✔

By default, this option is

300

2.2

1003 - Trunk Options: Activate Over

ow at Night.

- To activate over

ow only at night, enter

(9).

- Refer to the

DS1000/2000 Software Manual

for more.

- By default, this option is

(6).

2.2.1

1003 - Trunk Options: Night Over

ow Destination

- Enter the IntraMail master number (

700

✔

By default, this option is

300

Step 3

Set the over

ow time (the interval calls will ring before over

ow occurs).

3.1

0401 - Trunk Revert interval

- A DIL to the Ring Group master number will over

ow to the IntraMail Automated Atten-

dant if not answered after this interval.

✔

By default, this interval is 15 seconds.

Programming UCD Hunting Group Over

Step 1

To set up UCD Hunting Group over

ow:

1.1

See

Master Mailbox

on page 122.

Programming DIL Over

Step 1

To set up DIL over

ow during the day and at night:

1.1

1003 - Trunk Options: Day Over

ow.

- Enter

(9) to enable DIL over

ow during the day and at night.

- Refer to the

DS1000/2000 Software Manual

for more.

✔

By default, this option is

(6).

1.2

1003 - Trunk Options: Day Over

ow Destination

- If you enable

Day Over

above, enter the IntraMail master number (

700

- Refer to the

DS1000/2000 Software Manual

for more.

- By default, this option is

300

Step 2

To set up DIL over

ow only at night:

2.1

1003 - Trunk Options: Night Over

ow.

- Enter

(9) to enable DIL over

ow only when the trunk is in the night mode.

- Refer to the

DS1000/2000 Software Manual

for more.

✔

By default, this option is

(6).

2.2

1003 - Trunk Options: Night Over

ow Destination

- If you enable

Night Over

above, enter the IntraMail master number (

700

- Refer to the

DS1000/2000 Software Manual

for more.

- By default, this option is

300

Summary of Contents for IntraMail 4

















































































































































































































































































Search results

Summary of Contents for IntraMail 4

Reviews:

Related manuals for IntraMail 4

Brands by name

Popular brands

NEC IntraMail 4, System Manual

Search results

Summary of Contents for IntraMail 4

Reviews:

Related manuals for IntraMail 4

Brands by name

Popular brands