3-16
Configuring Your System
Thermal Sensor Submenu
Feature
Choices or
Display Only
Description
Your Setting
Thermal Sensor
Enabled
Disabled
When enabled determines if
the BIOS will disable boot (if
temperature is not within a
safe range).
Upper Limit
50
(11 to 80)
Sets the upper temperature
limit in Centigrade.
Lower Limit
5
(0 to 69)
Sets the lower temperature
limit in Centigrade.
Wake On Events Submenu
Feature
Choices or
Display Only
Description
Your Setting
Wake On LAN
Enabled
Disabled
Enables Wake ON LAN
support.
Wake On Ring
Enabled
Disabled
Enables Wake ON Ring
support.
Console Redirection Submenu
Feature
Choices or
Display Only
Description
Your Setting
Serial Port Address
Disabled
Serial Port 2
(3F8h/IRQ4)
Serial Port 2
(2F8h/IRQ3)
If enabled, the console will be
redirected to this port.
If console redirection is
enabled, this address must
match the settings of serial
port 2.
Baud Rate
57.6K
19.2K
Enables the specified baud
rate.
Flow Control
No Flow Control
XON/OFF
Enables flow control.
Console
Connection
Direct
Via Modem
Indicate whether the console is
connected directly to the
system or a modem is used to
connect.
Summary of Contents for EXPRESS5800/120Md Series
