5-14
Problem Solving
Table 5-1. POST Error Codes and Messages
Code
Error Message
0200
Failure Fixed Disk
0210
Stuck Key
0211
Keyboard error
0212
Keyboard Controller Failed
0213
Keyboard locked - Unlock key switch
0220
Monitor type does not match CMOS - Run SETUP
0230
System RAM Failed at offset
0231
Shadow RAM Failed at offset
0232
Extended RAM Failed at address line
0233
Memory type mixing detected
0234
Single-bit ECC error
0235
Multiple-bit ECC error occurred
0250
System battery is dead - Replace and run SETUP
0251
System CMOS checksum bad - Default configuration used
0260
System timer error
0270
Real time clock error
0271
Check date and time
02B0
Diskette drive A error
02B2
Incorrect Drive A type - run SETUP
02D0
System cache error - Cache disabled
0B1B
PCI System Error on Bus/Device/Function
0B1C
PCI Parity Error on Bus/Device/Function
0B30
Fan 1 Alarm occurred
0B31
Fan 2 Alarm occurred
0B32
Fan 3 Alarm occurred
0B33
Fan 4 Alarm occurred
0B34
Fan 5 Alarm occurred
0B35
Fan 6 Alarm occurred
0B46
ESMINT not configured
0B50
CPU #1 with error taken off line
0B51
CPU #2 with error taken off line
0B5F
Forced to use CPU with error
0B60
DIMM group #1 has been disabled
Summary of Contents for EXPRESS5800/120Md Series
