Configuring Your System 3-21
Table 3-2 Adaptec SCSI Utility Setup Configurations
OPTION
RECOMMENDED SETTING
OR DISPLAY ONLY
YOUR
CONFIGURATION
SCSI Bus Interface Definitions
Host Adapter SCSI ID
7
SCSI Parity Checking
Enabled
Host Adapter SCSI Termination
Enabled
Additional Options
Boot Device Options
Press ENTER for menu
Boot Channel
A First
Boot SCSI ID
0
Boot LUN Number
0
SCSI Device Configuration
Press ENTER for menu
Sync Transfer Rate (MB/Sec)
160
Initiate Wide Negotiation
Yes
Enable Disconnection
Yes
Send Start Unit Command
Yes
Enable Write Back Cache
No
BIOS Multiple LUN Support
No
1
Include in BIOS Scan
Yes
1
Advanced Configuration Options
Press ENTER for menu.
Plug and Play SCAM Support
Disabled
Reset SCSI Bus at IC Initialization
Enabled
Display <Ctrl-A> Messages During BIOS
Initialization
Enabled
Extended BIOS Translation for DOS
Drives >1 GByte
Enabled
Verbose/Silent Mode
Verbose
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space)
Enabled
1
Domain Validation
Enabled
1
Support Removable Disks
Under BIOS as Fixed Disks
Disabled
1, 2
BIOS Support for Int13 Extensions
Enabled
1
1
No effect if BIOS is disabled.
2
Do not remove media from a removable media drive if it is under BIOS control.
Summary of Contents for EXPRESS5800/120Md Series
