![background image](http://html.mh-extra.com/html/nec/express5800-120md-series/express5800-120md-series_user-manual_251192106.webp)
4-14
Upgrading Your System
Removing/Installing the Cooling Baffle
Use the following procedure to remove the cooling baffle (see Figure 4-9). To
install the cooling baffle follow these removal procedures in the reverse order.
1.
Observe the safety and ESD precautions listed at the beginning of this
chapter.
2.
Power off the system. Ensure the power cords are unplugged from the AC
wall outlet.
3.
Remove the option board cover. See
Removing the Option Board Cover
earlier in this chapter. Set the option board cover aside for reinstallation
later.
4.
Release the pushpin securing the cooling baffle to the chassis
5.
While lifting the rear of the baffle simultaneously release the front locking
tab from its slot in the chassis and carefully remove the baffle. Set the
cooling baffle aside for reinstallation later.
.
A
– Baffle
B
– Pushpin
C
– Locking tab
Figure 4-9. Removing the Cooling Baffle
Summary of Contents for EXPRESS5800/120Md Series
