4-28
Upgrading Your System
12.
Be sure to push the bracket slot up against the expansion slot frame. If this is
not done, the bracket may interfere with an adjacent bracket.
13.
Reinstall the expansion slot screw to secure the PCI option board to the
chassis and close the hinge bracket, see Figure 4-19.
Figure 4-19. Installing a PCI Option Board
14.
If you installed a PCI SCSI host adapter board, go to Appendix C,
“Cabling,” for procedures on cabling these boards into the system. For all
other boards, continue.
15.
Connect any external cables (if they are needed) to the installed option
board.
16.
Reinstall the option board cover removed in step 3 above. See
Installing the
Option Board Cover
earlier in this chapter.
17.
Plug in the power cords and power up the system.
18.
Run the BIOS Setup.
Summary of Contents for EXPRESS5800/120Md Series
