![background image](http://html.mh-extra.com/html/nec/express5800-120md-series/express5800-120md-series_user-manual_251192109.webp)
Upgrading Your System 4-17
6.
Remove a terminator board or processor cartridge as follows.
Latch levers are provided with your system for easy removal of a processor
cartridge or a termination board (see Figure 4-11).
!
WARNING
If the system was running, any processor and heat sink
installed is hot. To avoid the possibility of a burn, let the
components cool for 10 minutes before continuing with these
procedures.
!
Release the latch and retention lockwire on each end of the device by
pulling the latch out from the device (see Figure 4-11).
!
Lift each retention lockwire from its recess in the latch and swivel the
lockwire outboard.
!
Fully open the two latches and pull the device out of its retention
module and connector slot.
A
B
C
A
– Device
B
– Latch
C
– Lockwire
Figure 4-11 Releasing the Latches and Lockwires
!
Store the device in an antistatic bag. Keep the device for use later.
!
Go to step 7 to install a processor cartridge or terminator board.
7.
Install a processor cartridge or terminator board as follows.
!
Remove a processor cartridge or terminator board from its antistatic
package and place it on a grounded static-free surface or conductive
foam pad.
Summary of Contents for EXPRESS5800/120Md Series
