4-52
Upgrading Your System
4.
Remove the two screws securing the blank cover of the bay where the
optional power supply will be installed and remove the cover, see Figure
4-47.
Note:
Save the blank cover and screws removed from
the optional power supply bay for future use.
Figure 4-47. Removing the Optional Power Supply Bay Blank Cover
5.
Pull out the front lever of the new power supply to be installed.
6.
Slide the power supply into the bay.
7.
Secure the power supply by pushing its front lever firmly into towards the
bay until you hear it click and fasten with one of the screws removed in step
4 above (see Figure 4-48).
Figure 4-48. Installing the Optional Power supply
Summary of Contents for EXPRESS5800/120Md Series
