Field Service Documentation
1
Snap Server 410
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Installing the Snap Server in a Rack
The Snap Server 410 can be mounted in a four-post, EIA-compliant rack, or a two-
post telco-style rack.
The Snap Server ships with two L-brackets to attach to the chassis and a packet of
screws for mounting the brackets to the chassis and to the rack. The brackets are not
universal. They are stamped Left and Right and must be mounted correctly.
Rack Mount Kit Inventory
Before you begin, make sure you have the following items from the package
containing the rack mounting kit:
• Two (1 left and 1 right) L-brackets (ears)
• Six (6) rack ear screws to attach the brackets to the chassis
• Four (4) rack mounting screws to attach the brackets to the rack posts
• A Phillips screwdriver
Installing the Server in a Rack With the L-Shaped Brackets
Caution
The chassis weighs approximately 26 pounds. Be sure to handle it
carefully.
1
Attach the brackets to the chassis, using the 6 screws provided.
You can attach the brackets to the front of the chassis (as shown in the illustration
below). Or you can attach the brackets farther back, so the ears are in the middle
of the chassis.
