![background image](http://html.mh-extra.com/html/nec/express5800-120md-series/express5800-120md-series_user-manual_251192145.webp)
Upgrading Your System 4-53
8.
Plug one end of the power cord into the AC input receptacle on the rear of
the optional power supply (see Figure 4-49) and connect the other end into
the AC wall outlets. While AC power is being connected the "PWR" LED
on the power supplies flash indicating that AC power is being applied to
them.
Figure 4-49. Connecting the AC Power Cord
Removing a Power Supply
To remove a power supply, perform the following steps.
1.
Observe the safety and ESD precautions listed at the beginning of this
chapter.
2.
Power off the system.
3.
Unplug the power cord from the AC wall outlet and from the input
receptacle on the rear of the power supply you are removing.
4.
Remove the screw securing the power supply to the to the power supply bay.
Note:
Save the screw removed from the power supply
bay for future use.
5.
Open its front lever and pull the power supply out of the bay.
6.
If you are replacing a power supply, perform steps 5 through 8 of the
previous subsection
Installing the Optional Power Supply
.
Note:
If a power supply is not being replaced, install a
blank cover over the empty bay to maintain the proper
cooling effect.
Summary of Contents for EXPRESS5800/120Md Series
