![background image](http://html.mh-extra.com/html/nec/express5800-120md-series/express5800-120md-series_user-manual_251192054.webp)
2-12
Setting Up the System
2.
With someone assisting you, use the handles on the front of the server and
the lip at the top rear of the server to lift and slide the server into the
extended rail slider assemblies.
!
Align the server center slide bars with the extended rail assemblies.
!
Carefully slide the server into the extended rail assemblies until it stops.
!
Carefully press in on the safety latches on the center slide bars, ensure
that the safety latch on the extension rail assemblies (see Figure 2-1) are
centered and slide the server all the way into the rack cabinet.
Note:
When you first slide the server into the rack
cabinet, extra pressure may have to be applied. After the
first time, the slides will start to move easier.
!
Check that the server slides in and out of the rack cabinet. Grasp the two
handles on the front of the server and slowly pull the server out and push
it back in.
!
Secure the faceplate of the server to the front of the rack cabinet by
screwing the thumbscrews into the cage nuts.
Figure 2-8 Mounting the server
Summary of Contents for EXPRESS5800/120Md Series
