Upgrading Your System 4-35
Figure 4-25. Attaching the Device Side Rails
9.
Install the media device into the bay as follows (see Figure 4-27):
!
Move any cables in the bay out of the way.
!
Align the rails on the media device with the supports in the bay.
!
Slide the device into the bay until it locks in place.
!
Connect the power cable (A) and data cable (B) to the device.
Figure 4-26. Installing a Removable Media Device
10.
If tower-based system, close the front door of the cabinet.
11.
If rack-mounted system, reinstall the rack front panel. See
Installing the
Rack-Mount Upgrade Kit
earlier in this chapter
12.
Plug in the power cords and power up the system.
13.
Run the BIOS Setup to configure the device.
Summary of Contents for EXPRESS5800/120Md Series
