2-18
Setting Up the System
Opening the Front Door of the Tower Cabinet
You must open the front door of the tower cabinet to turn the server power on or
off, place the server in sleep mode, mount or dismount a floppy disk, mount or
dismount a hard disk drive, or mount or dismount 5 1/4-inch removable media
devices.
Note:
The standard CD-ROM drive and
some options for
the 5 1/4-inch devices such as a CD-ROM drive have a
function to eject a tray or media using a software command.
Before issuing a software command to eject a tray or media,
confirm that the front door is open. If the command is
executed while the front door is closed a tray or media may
run into the front door resulting in an error or may cause the
unit to fail.
Open the front door as follows.
1.
To open the front door, you need to use the security key provided with the
server. Insert the security key into the key slot and turn the key to the left to
unlock the door (see Figure 2-11).
2.
Swing the door open from its right side.
Figure 2-11 Opening the Front Door
Summary of Contents for EXPRESS5800/120Md Series
