![background image](http://html.mh-extra.com/html/nec/express5800-120md-series/express5800-120md-series_user-manual_251192113.webp)
Upgrading Your System 4-21
6.
Insert the bottom edge of the DIMM into the socket, and press down firmly
on the DIMM until it seats correctly. The retaining levers (see Figure 4-13)
on the sockets are not "tools" to aid in the insertion, only to keep the DIMMs
in place and to aid in extraction. The levers will automatically close in place
once the DIMM is fully inserted into the socket.
7.
Gently push the plastic ejector levers on the socket ends to the upright
position.
8.
Repeat the steps to install each DIMM.
9.
Replace the processor cooling baffle (see “Removing or Installing the
Cooling Baffle” earlier in this section) removed earlier in these procedures.
10.
Reinstall the option board cover removed earlier in these procedures.
11.
Plug in the power cords and power up the system.
12.
Run the BIOS Setup and select
Memory Reconfiguration
on the
Advanced
Menu
to verify that the status of the added memory shows
Normal
.
13.
Select
Yes
for
Reset Configuration Data
in the
Advanced Menu
. Selecting
Yes
updates the hardware configuration information.
Summary of Contents for EXPRESS5800/120Md Series
