NEC Express5800/110Ei, User Manual

Page: 271 / 314

Appendix A
Specifications
NEC Express5800/110Ei
Item
N8100-1005F
Type Intel

Pentium

4 processor
Clock 3.8GHz/1MB
Number of processors 1
CPU
Maximum 1
Chipset Intel E7221
Standard 512 MB (512 MB
×
1)
Maximum 4 GB (1 GB
×
4, the standard DIMM must be replaced.)
Expansion unit 1 DIMM (256MB/512MB/1GB) *1
Expansion times 3 times
Memory module SDRAM DIMM (DDR400, Unbuffered type, Dual channel memory
configuration supported)
Memory
Error check ECC
Graphics (VRAM) Chipset Graphic
Floppy disk (standard) 3.5-inch drive
×
1 (standard)
Hard disk (standard) None
Hard disk (maximum) For onboard S-ATA channel: 750GB (250GB
×
3)
*2
For add-in SCSI card: 439.5GB (146.5GB
×
3)
*3
Auxiliary
input device
CD-ROM (standard) ATAPI interface
×
1 (x40 speed)
5.25-inch file bay 2 slots (An ATAPI CD-ROM drive is factory-installed.)
3.5-inch disk bay 1 slot (A 1.44MB-floppy disk drive is factory-installed.)
Additional PCI slot 5 slots (1 slot for PCI-Express, 2 slots for 64bit/100MHz, 2 slots for
32bit/33MHz)
Disk array Standard (SATA controller)/Option (SCSI RAID controller)
Keyboard MINI DIN 6-pin connector (1 port)
Mouse MINI DIN 6-pin connector (1 port)
USB 4-pin (2 ports)
Serial D-sub 9-pin (1 port)
Parallel IEEE1284 standard, D-sub 25-pin (1 port)
Network RJ-45 (1 port, 1000BASE-T/100BASE-TX/10BASE-T)
External
interface
Display MINI D-sub 15-pin (1 port)
Cabinet design Desk-side, mini tower
External dimensions 173 (width)
×
448 (height)
×
453 (depth) mm
Weight 20 kg (Max.)
Power supply 100 to 120 VAC
±
10%, 200 to 240 VAC
±
10%, 50/60 Hz
±
1 Hz
Power consumption 420 VA, 415 W
Temperature 10 to 35°C (operating), -10 to 55°C (non-operating, storage) Environmental
requirements
Humidity 20 to 80% RH (no condensation)
*1 A maximum of three DIMMs can be installed to the server.
*2 The optional RAID controller is required.
*3 The optional SCSI controller is required.