![background image](http://html.mh-extra.com/html/nec/express5800-110ei/express5800-110ei_user-manual_251177242.webp)
9-32 Upgrading Your Server
Installation
Install a DIMM in the following procedure.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the left side cover as described earlier in this chapter.
3.
Firmly hold the server with your both hands so that its left side faces upward, and bring it
down slowly and gently.
4.
Confirm the socket in which a DIMM is installed.
5.
Open the levers at both ends of the socket.
IMPORTANT:
To avoid damaging the lever, do not apply an excess
force to the lever.
NOTE:
Use extreme care when installing a DIMM. Applying too
much pressure can damage the socket. Keyed DIMMs insert only one
way.
6.
Position the DIMM so that the notch in the bottom edge of the DIMM aligns with the
keyed socket.
7.
Push the DIMM to the socket straight.
If the DIMM is inserted into the DIMM socket, the lever is automatically closed.
Key slot
Key
Summary of Contents for Express5800/110Ei
