NEC Express5800/110Ei, User Manual

Page: 85 / 314

Configuring Your Server 4-23
Server
The Server menu appears if you move the cursor to "Server."
See the table below for the items.
Option Parameter Description Your Setting
Assert NMI on
SERR Disabled
[Enabled] Indicates whether PCI SERR is
supported or not.
Post Error Pause Disabled
[Enabled] Indicates whether POST is aborted once
at the end of POST if an error occurs
during the execution of POST.
AC LINK Stay Off
[Last State]
Power On Indicates the AC LINK function. Shows
the state of the power of the server.
[ ]: Factory-set
IMPORTANT:
„
To power on the server from the UPS (Uninterruptible Power
Supply), select [Server] - [AC Link] - [Power On].
„
If the server is connected to the UPS, set at least 10 seconds delay in
the power-on schedule.
The table below shows the operation when the AC power to the server is turn off once and then on
again, depending on the setting of "AC LINK."
Setting of AC LINK
System status before AC power off
Stay Off Last State Power On
Operating Off On On
Aborting (DC power being off also) Off Off On
Forced shutdown Off Off On
* Press the power switch continuously for four seconds or longer. This forcibly turns off the
power.