![background image](http://html.mh-extra.com/html/nec/express5800-110ei/express5800-110ei_user-manual_251177303.webp)
Installing Windows 2000 E-7
7.
Select the proper SCSI Adapter and press
Enter
.
–
INITIO INI-A10XU2W SCSI Host Adapter
(When N8103-65F board is installed.)
–
MegaRAID SCSI 320-1 Controller Driver
(When N8103-80F board is installed.)
–
Adaptec Ultra320 SCSI Cards (Win2000)
(When N8103-75F board is installed.)
–
Win2000 Promise FastTrak S150 SX4 (tm) Controller
(When N8103-78F board is installed.)
–
Adaptec Embedded Serial ATA HostRAID Controller
(When HostRAID is installed.)
Continue performing tasks according to the subsequent messages that appear.
After installation is completed, be sure to execute the tasks described in "Driver Installation and
Advanced Settings" and "Updating the System" of this manual.
Reinstallation to Multiple Logical Drives
This subsection describes the procedure for reinstalling the operation system if the multiple logical
drives exist.
Before Re-installing the Operation System
Be sure to make backup copies before re-installing the operation system just in case.
Re-installing the Operation System
1.
Start the clean installation following the procedure described in this manual.
2.
Specify the partition in which you want to install the operating system when the following
message appears:
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP and DOWN ARROW keys to select an item in the list.
*
Cannot modify the drive letter of your system or boot volume. Confirm the proper
drive letter is assigned and then, continue the setup.
Summary of Contents for Express5800/110Ei
