Naviter Oudie 3, User Manual

Page: 88 / 136

Oudie 3 84
© 2003 - 2013 ... Naviter d.o.o.
. Speed over ground (GS) = Groundspeed. This value is negative if the difference between heading
and track is more than 90 degrees
.
True airspeed (TAS) = Groundspeed corrected with indicated wind
. Speed to Fly (STF) = Speed to fly according to MC theory which takes MC setting and sink into
account.
.
Speed to gate/Task speed (Tsk.Sp.) = Speed on task until the present position
. Task required speed (tReq.Sp) = Average speed you need to achieve to complete the task inside the
Task time
.
Speed Last hour (60'.Sp) = Average speed achieved in the last 60 minutes
Vario navboxes:
. Last thermal vario (VarT) = average vario since beginning of circling
. Average vertical speed (VarA) = average vario for the last 20s
. Vertical speed (Vario) = current vario reading
. Netto vertical speed (Netto) = Variometer reading corrected for the sink of the glider according to
the selected polar
Wind navboxes:
. Current wind (Wind) = Current wind measurment
. Current wind component (cWind) = Wind component in current direction of the flight. Positive values
are tailwind, negative values are headwind. Two numbers are displayed. First number is difference
between groundspeed and true airspeed. The second one is wind component derived from the calculated
wind at current altitude. When the two are significantly different you will know not to rely on the
calculated wind strength
Airspace navboxes:
. Nearest airspace - Horizontally (Near AS.H) = Distance to horizontally nearest airspace where you
are not "inside". The caption of this navbox will show airspace name. Tapping on this navbox will
temporarily arm this airspace so you can turn it off if you wish.
.
Nearest airspace - Altitude (Near AS.V) = Relative altitude to the horizontally nearest airspace. It
can be either negative if you are below the lower limit of the airspace, positive if you are above the
upper limit of the airspace or "Inside" if your altitude is in between the lower and the upper limit of the
airspace in question.
.
Nearest airspace - Vertically (Near AS.V) = Relative altitude to the airspace at the location of the
glider. It can be either negative if you are below an airspace , positive if you are above an airspace or
"Inside" if your altitude is in between the lower and the upper limit of the airspace in question.
Task navboxes:
. Task remaining distance (tDis) = Distance remaining on the task
. Task arrival altitude (tArr) = Altitude required to complete the task
. Task required L/D (tL/D) = Required glide ration to complete the task
. Task arrival time (tETA) = Estimated time of arrival to the finish
. Task estimated time (tETE) = Estimated time to go on task
. Task remaining time (tRemain) = Remaining time until task time elapses
. Task Delta time (tDelta) = Task established time - Task remaining time
. Speed to gate/Task speed (tsk.Sp) = required speed for optimal arrival on gate in time
. Task speed (Tsk.Sp.) = Speed on task until the present position
. Task required speed (tReq.Sp) = Average speed you need to achieve to complete the task inside the
Task time
.
Task gate time (Gate) = opening time of gate (depends on the UTC Offset Setting)
. Task time to go (TTG) = optimal arrival time for the start gate
Statistics navboxes:
92