Naviter Oudie 3, User Manual

Page: 23 / 136

Getting started 19
© 2003 - 2013 ... Naviter d.o.o.
4. Screen taps
In addition to all the above you may tap anywhere on the screen and then choose "Airspace" to quickly
access the list of airspaces at the location of the tap. With this list you can quickly change the visibility of
the airspaces or simply get an overview of what lies ahead. You can also change the properties of an
airspace such as lower or upper limit.
With this information airspace navigation should be easy and understandable even in a rather complex
airspace environment.
Read also:
. Setting up the Warnings
. Changing properties of an airspace
. Loading (multiple) airspace files
2.10 Entering and flying the tasks
This is a tutorial about entering the task in Oudie 3. We have had the privilege to look over the shoulder
many impressively experienced pilots who have found a very difficult way to enter a task into Oudie3.
Please read this because entering the task is just that - enter the waypoint names, set the times (Gate,
Start speed section, End speed section, Task deadline) and Sector type (Line, Cylinder, FAI sector or
Assigned area). No setting up of observation zones is neccessary. Tutorial will focus on entering the
demo task. The default one in the evaluation version of Oudie 3. The task will become a 99,3 km Race to
goal in the south-eastern part of the Alps (Slovenia). Both Racing, badge and record tasks as well as
Assigned Area tasks are covered.
Always start from the scratch. Menu > Task > Tools > Clear task:
88
76
39