Naviter Oudie 3, User Manual

Page: 103 / 136

Settings 99
© 2003 - 2013 ... Naviter d.o.o.
Automatic search for files . When you open the "Select files dialog" such as in the screenshot above,
the whole file system of your device is searched for corresponding files. If you are looking for terrain
files, all CIT files from your PDA will be listed etc.
7.18 Log
Oudie 3 does also log a flight and produces an IGC file. It can however be analyzed in SeeYou or similar
software after the flight.
This dialog lets you enter the Header information for the flights recorded with Oudie 3. Information on
Pilot, Copilot, Competition ID, Glider and Class is collected here. Interval spin box lets you select
the interval between consecutive fixes that are recorded while Enable logging check box turns logging
on and off. The location of the stored IGC file is determined through the Settings > Files dialog.
The Start/Finish logging button enables you to manually start or finish the recording of the flight
regardless of the current flight parameters which try to determine takeoff and landing automatically.
Launch Type determines how soaring begin is calculated. At the setting "Foot launch" Soaring begin is
equal to takeoff. At other settings it is not.
97