Naviter Oudie 3, User Manual

Page: 86 / 136

Oudie 3 82
© 2003 - 2013 ... Naviter d.o.o.
7.7 Navboxes
Navigational boxes are one of the most important parts of Oudie 3. They show all parameters of flight.
You have full control over which Navboxes you wish to display, how large and how transparent they
should be and where they should be located. Note that each Navbox can also function as a button if you
assign an "Action" to it.
Navboxes are setup separately for Map 1 and Map 2 views. That is because normally you will want to use
the two map views for two different reasons. One could be general navigation while the other one is
approaching the waypoint where details are important. You will require two different settings for which
Navboxes should be displayed in these conditions.
Through this dialog you can select which of the available Navboxes you wish to display on the active map.
The Combo box allows you to choose from a sub-group of navboxes so you can more easily select or
change the ones you want. One sub-group is also "Currently visible navboxes" for example.
Navigation navboxes:
. Target name (Target) = Name of the selected waypoint
. Distance to target (Dis) = Distance to the selected cylinder by optimized way
. Steering course (To) = Difference in degrees between Bearing to target and Track over ground
. Bearing to target (Brg) = Direction towards the selected waypoint