Service Manual Chapter8. CDU (Cash Dispenser Unit)
©
Nautilus Hyosung, Inc.
All Rights Reserved.
8-13
6) CS4T (A, B)
①
Remove the M3 screws (2 places) of the sensor bracket at the left and right
sides.
②
Remove the connector and the cable tie to remove the sensor supporter. Be
careful not to break the connector pin when removing.
③
Remove the sensor bracket.
④
Remove the M3 sensor fastening screws of the sensor to replace from the
removed sensor bracket.
Replace the sensor.
⑤
Assemble the unit in the reverse order
⑥
- ~ .
④ ①