Chapter8. CDU (Cash Dispenser Unit) Service Manual
8-8
©
Nautilus Hyosung, Inc.
All Rights Reserved.
1. Returning Path Sensor
1) CS1D(A,B) / CS15D(A,B) / CS31D(A,B)/ CS41D(A,B)
①
Remove the sensor bracket M4 screws (2 places each) as shown in the figure
below.
②
Remove the connector and the cable tie to remove the sensor bracket.
Be careful not to break the connector pin when removing.
③
Remove the sensor bracket.
④
From the removed sensor bracket, remove the M3 sensor screws (1 place each)
of the sensor which will be replaced.
⑤
Replace the sensor.
⑥
Assemble the unit in the reverse order -
④
~
①
.
CS1D
CS15D
CS31D
CS41D
CS41AD
CS41BD