Chapter8. CDU (Cash Dispenser Unit) Service Manual
8-14
©
Nautilus Hyosung, Inc.
All Rights Reserved.
7) CS13D
Remov
①
e the M3 screws (4 places) of the sensor bracket.
Remove the connector and the cable tie to remove the sensor supporter. Be
②
careful not to break the connector pin when removing.
Remove the sensor bracket.
③
Remove the M3 sensor fastening screws to repl
④
ace from the removed sensor
bracket.
Replace the sensor.
⑤
Assemble the unit in the reverse order
⑥
- ~ . Make sure to fasten the spacer
④ ①
and the screw end is not protruding out to the other side of the bracket.