Chapter8. CDU (Cash Dispenser Unit) Service Manual
8-12
©
Nautilus Hyosung, Inc.
All Rights Reserved.
5) CS4D (A, B)
①
Remove the M3 screws (2 places) of the sensor bracket.
②
Remove the connector and the cable tie to remove the sensor supporter. Be
careful not to break the connector pin when removing.
③
Remove the sensor bracket.
④
Remove the M3 sensor fastening screws to replace from the removed sensor
bracket.
⑤
Replace the sensor.
⑥
Assemble the unit in the reverse order -
④
~
①
. Make sure to fasten the spacer
and the screw end is not protruding out to the other side of the bracket.