Chapter8. CDU (Cash Dispenser Unit) Service Manual
8-10
©
Nautilus Hyosung, Inc.
All Rights Reserved.
3) CS2D
①
Remove the M3 screws (4 places) of the sensor bracket.
②
Remove the connector and the cable tie to remove the sensor supporter. Be
careful not to break the connector pin when removing.
③
Remove the M3 sensor screw (1 place).
④
Remove the M3 sensor fastening screws from the removed sensor bracket.
⑤
Replace the sensor.
⑥
Assemble the unit in the reverse order -
④
~
①
. Make sure to fasten the spacer
and the screw end is not protruding out to the other side of the bracket.
SCREW : M3
44651301
MX5300-CE LEVEL1
(P/N : 7310000581)
MX5300-XP
(P/N : 7310000198)